Electrical parameters
System voltage 12 / 24VDC Auto work
Rated battery current 10A
Rated load current 10A
Charge circuit voltage drop ≤0.26V
Discharge circuit voltage drop ≤0.15V
Self consumption ≤6mA
Battery voltage parameters (TEMPCO -5mV/℃/2V,25℃ ref）
Equalize charging voltage 14.6V;x2/24V
Boost charging voltage 14.4V;x2/24V
Float charging voltage 13.6V;x2/24V
Low voltage reconnect charging voltage 12.6V;x2/24V
Under voltage warning voltage 12V; x2/24V
Low voltage disconnect voltage 11.1V;x2/24V
Equalize duration 60 MINS
Boost duration 60 MINS
Environmental parameters
Working temperature -35℃ to +55℃
Humidity 10%-90% NC
Enclosure IP30
Terminal 2.5mm2
Dimension 140×89×27mm
Net weight 0.23kg
Solar Charger Controller
PWM Solar Charger Controller 12V/24V 10A NEWSTAR EPHC10-EC
Rated Current：10A
System Voltage：12/24V Auto Work
Intelligent System Optimum Control
12/24V auto work
High efficient Series PWM charging with
temperature compensation
Use MOSFET as electronic switch, without any
mechanical switch
Load and battery status indicators
Electronic protection: over charging, over
discharging, overload, and short circuit
Load work mode: ON/OFF
EPHC10-EC series is a reliable and economical
solar controller
Application：
Ideal for off-grid solar system that loads are
normally on or controlled by manual
★Solar home system
★Solar CCTV system
★ Solar traffic system
★Wild automatic detection equipment etc
Reviews
There are no reviews yet.