300 watt maximum heavy-duty continuous use transformer for use with 110/127 volt or 220/240 volt input power Converts single phase 220/240 volts down to 110/127 volts or 110/127V Upto 220/240 volt Compatible with both 50Hz and 60Hz. One grounded Universal Outlet in front of unit (accepts 3 or 2 prong plugs from most countries) Hard wired with a European shuck Plug also good for Asian outlets. Free, us adapter included in the box. Built-in fuse protection (2 extra Fuses included). durable design with a heavy-duty cord. Ce approved and certified Transformer purchase guide: remember to leave at least a 100 percent slack for the voltage converter transformer. For TVs, Xbox and game consoles, The power Surge margin is 3 times the rated wattage. For heating appliances, laser printers and power tools you need to leave a power spike
AC-AC Step-Up & Step-Down Converter
300 Watts Step Up & Down Voltage Transformer Converter for 110/127VAC & 220/240V 300W
- 220/240V -110V/127V BUILT-IN AC VOLTAGE SELECTION BULIT IN 2FLAT PIN OR 2 ROUND PIN SOCKET INCLUDED A FLAT PIN ADAPTOR PLUG FUSE PROTECTION
- WARNING BEFORE OPERATION (1) CHECK THE WATTAGE REQUIRMENT OE YOUR EQUIPMENT FROM THENAME PLATE AND SPECES TO DETERMINE THE CORRECT WATTAGE AND WHICH CONVERTER TO BE USED
- (2) YOU MUST SELECT THE CORRECT INPUT VOLTAGE ACCORDING TO THE POWER VOLTAGE OF YOUR COUNTRY ,EITHER 110/127VAC OR 220/240VAC THE CONVERTER IS FREE SET AT 220VAC BY THE FACTORY FOR STEP-DOWN YOU MAY RE-SET THE INPUT VOLTAGE TO 110/127VAC (STEP-UP) BY PUSHINIG THE INPUT VOLTAGE . SLECTION SWITCH AT THE TOP OF THE CONVERTER .INCORRECT SLECTION OF INPUT VOLTAGE MAY CAUSE PERMANENT DAMAGE TO YOUR CONVERTER AND EQUIPMENT.
- 3) AFTER CORRECT INPUT VOLTAGE IS SLECTED AND SET PLUG THE AC POWER CORD OF THE CONVERTER IN THE WALL OUTLET (4) IF THERE IS ANY HUMMING SOUND OR VIBRATION , DISCONECT THE POWER CORD IMMEDIATELY FROM THE WALL OUTLET AND REVIEW INSTRUCTION S TO ENSURE ALL STEPS ARE FOLLOWED PROPERLY .
- 5) DO NOT OPERATE YOUR CONVERTER OVER THE MAXIMUM CAPACITY .IN CASE OE OVERLOAD .FUSE IN THE CONVERTER WILL BE BLOWN. REPLACE THE FUSE WITH SAME AMP. (6) IF NOT IN USE, UNPLUG THE CONVERTER.
Reviews
There are no reviews yet.